Dashboard (Main screen)
Boards
This section is intended for monitoring the status and operating parameters of the miner’s hash boards. Each board contains a set of ASIC chips and functions as an independent computing module.
Section Purpose
The Boards section provides detailed information about the operation of each hash board and is used for technical diagnostics and mining stability analysis.
Displayed Parameters
For each board (Board 1, Board 2, etc.), the following metrics are shown:
- Hashrate (TH/s) — current computing performance of the board.
- Errors (H/s or %) — number or ratio of hashing errors.
- Temperature (°C) — operating temperature range of the chips on the board.
- Frequency (MHz) — operating frequency of the ASIC chips.
- Voltage (V) — supply voltage of the board.
- Consumption (W) — power consumption of the specific board.
- Chip status — status of ASIC chips (e.g., All chips are good).
Data Interpretation
- Stable hashrate and no errors indicate correct board operation.
- High temperatures or increasing errors may signal cooling or power supply issues.
- Significant deviation of one board’s parameters compared to others usually indicates a hardware fault.
Practical Value
This section is used for:
- detailed diagnostics of each hash board;
- detecting degradation of individual boards or ASIC chips;
- analyzing load distribution between boards;
- optimizing frequency and voltage.
Impact on Device Operation
Problems on a single board may lead to:
- reduced overall device hashrate;
- increased power consumption;
- hardware errors;
- automatic board shutdown by the protection system.
Recommended Actions When Issues Are Detected
- Compare the affected board’s parameters with other boards.
- Check the cooling system and temperature conditions.
- Reboot the device.
- Inspect or replace power cables.
- Perform hardware diagnostics of the board if necessary.