Workers

Single Operations

Single operations are performed on a single device through the context menu (⋯).

Miner

Reboot

Full hardware reboot of the device. Takes 1–3 minutes. Requires confirmation in a dialog.

When to use: device is frozen, not responding to commands.

Restart

Software restart of the miner. Takes 30–60 seconds, less aggressive than Reboot.

When to use: unstable operation, hashrate drop, applying new pool settings.

Pause

Stop mining. The device remains accessible on the network, status changes to Stopped.

When to use: maintenance without physically disconnecting the device.

Resume

Resume mining after a pause. Status changes to Mining.

Locate

Physical identification of the device via blinking indicators. An orange blinking icon appears in the device list. Toggle on/off.

When to use: find a specific device among hundreds of pieces of equipment.

Miner configs

Change pools

Opens a dialog with 3 pool slots. Supports template variables:

{account} — account
{worker} — worker
{ip} — IP address
{mac} — MAC address

Change preset

Switch overclock preset. Only available for HashCore Firmware.

Change cooling mode

Switch cooling mode: Auto / Manual / Immersion.

Firmware

Install firmware

Install firmware from a pre-created firmware set.

Maintenance

Diagnostic report

Generate a diagnostics archive. Only available for HashCore Firmware. The result is available through the Activity Center, the file is stored for 2 hours.

Change password

Change the device web interface password.

Device Operations

Device operations are available through the context menu. They are divided into two categories: single and group.

Group Operations

Group operations allow you to perform an action on multiple devices simultaneously.