Worker List

Go to the Workers section in the sidebar to open the list.

The table is adapted for different screen sizes: horizontal scrolling on narrow screens, minimal touch area for interactive elements on mobile devices. v1.0.0-alpha1

What is displayed in the table v0.2.0

The basic set of metrics was added in v0.2.0, board indicators in v0.5.0, the Current Preset column and provider display fix in v0.7.0.

The following columns are available for each device in the table:

The first and last columns are fixed during horizontal scrolling. The set of columns depends on the selected display mode — see the "Column Modes" section below.

If metric data is unavailable — -- is displayed. 0 is never displayed for unavailable data.

Device Statuses

Pulse uses a two-level status system. For more details — see Core Concepts → Device Statuses.

Connectivity (icon):

• 🟢 Online — device is available
• 🔴 Offline — no connection for more than 5 minutes

Miner Status (tag): Mining, Stopped, Autotuning, Error, Offline, Unknown.

The Mining / Error / Stopped / Offline tags are clickable — they instantly filter the list by the selected status. Above the table, a panel with Connectivity toggles is fixed: All · Online N · Offline N — the counters do not change with additional filtering. The "Filtered N" tag appears in the header with any active filter except Connectivity. v0.7.0, panel — v1.0.0-alpha1

Column Modes v1.0.0-alpha1

A button in the table toolbar switches the set of displayed columns without needing to configure each one manually.

Switching between Metrics and Pools happens instantly. In Custom mode, a panel opens with checkboxes for each column and drag-and-drop to change the order. The selection is saved in the browser and is not reset between sessions.

Columns in Pools mode

Three composite columns Pool 1 / Pool 2 / Pool 3. Each contains the Pool URL (with ping — only for the active Pool) and Worker name. A colored badge shows the status: Active (green), Working (orange), Rejecting (red), Offline/Disabled (gray). Sorting by URL and Worker of each Pool is supported, as well as filtering by account.

Cooling mode column

In Metrics mode, the Fans column shows RPM and fan duty. A separate Cooling mode column shows the cooling mode and its parameter: Auto / 65°C, Manual / 70%, Immersion.

Filtering and Search v0.3.0

Click the Filters button to open the filtering panel. Available filters (basic set — v0.3.0, Lock state and Connectivity filters — v0.7.0):

• Model — by device model
• Firmware provider — by firmware developer
• Firmware version — by firmware version
• Algorithm — by mining algorithm
• Miner Status — by miner status
• Connectivity — Online / Offline
• Lock state — by lock status
• User pool — by configured Pool

Multi-selection is supported within each filter. Filter values are dynamic — the list is updated based on current data.

Search is performed by IP address, MAC address, and serial number. The search bar is located in the upper right corner of the list.

The state of filters and search is saved in the URL — the page restores its state upon refresh.

Contextual Unlock v1.0.0-alpha1

If a device is locked (lock tag in the Lock state column), clicking the tag opens the Edit Scan Task dialog directly on the Unlock configs tab — without needing to manually search for the required scan task. More details on credential setup — in Agents → Scan Tasks.

Sorting

Click on any column header to sort the list by that parameter. Clicking again changes the sort direction. A detailed list of available fields — in the Sorting section.

Device Selection and Group Operations v0.3.0

Check the checkbox to the left of a device to select it. To select all devices — click Select All in the table header.

After selecting one or more devices, a group operations panel appears at the top. More details on operations — in Devices → Operations.

Invert Selection — this button switches the selection to all other devices. Useful when you need to exclude a few devices from a group.

Device Isolation v0.3.0

Isolation allows you to focus on a specific group of devices and temporarily hide the rest.

1. Select the desired devices using the checkboxes
2. Click Isolate in the group actions panel
3. The list will show only the selected devices — an "Isolate" tag will appear in the header
4. To exit isolation mode — click ✕ on the "Isolate" tag

IP Reporter v0.8.0 to identify physical devices on racks directly from the Pulse interface.

A technician presses the IP Report button on the ASIC device itself → the device appears in a special list in Pulse. A "IP Report N" dropdown appears in the table header with three actions:

• Isolate in list — show only devices from the report
• Select reported — select all devices from the report
• Clear report list — clear the list

Events accumulate and are filtered by the current site.

Board Status Indicators v0.5.0

In the Boards column, each device displays compact colored dots — one for each board:

• 🟢 Green — board is mining
• 🟠 Orange — initialization (blinking)
• 🔴 Red — board error (blinking)
• ⚫ Gray — board is stopped or disabled

Device Counter v0.2.0

The list header displays the total number of devices and the number of online devices, for example, "842 / 1000 Online". With active filters, the counter reflects the number of devices in the current view.