Cooling Management
Single Configuration
- Open the device context menu (⋯)
- Select Maintenance → Change cooling mode
- Select mode and parameters
- Click Apply
Group Configuration
- Select devices
- Click Thermal config
- Specify parameters
- Click Apply
Parameters
| Parameter | Description |
|---|---|
| Cooling mode | Auto / Manual / No change (for group operations) |
| Target temperature | Target temperature in °C |
| Fan speed | Fan speed in % (in Manual mode) |
| Min fans | Minimum number of working fans |
Cooling Modes
Auto
Automatic fan control. The system selects the speed to maintain the target temperature.
Manual
Manual control — set fan speed as a percentage. Target temperature and Min fans parameters work in this mode.
Immersion
Immersion cooling mode. Fans are disabled.
No change
Only available for group operations — don't change the current cooling mode.
Partial Update
For group operations, only fill in the fields you want to change. Unfilled fields do not affect the device's current settings.
Devices without HashCore Firmware and devices in Immersion mode are skipped during group operations.
Board Management
Board management from the Pulse interface. Only available for devices with HashCore Firmware.
Agents
An agent is a key component of the HashCore Pulse infrastructure. It's a local application installed on a computer or server on the same network as the miners, which scans the network, collects metrics, and executes user commands.