Quick Start

Log in to the Web Interface

Open the web interface using the device's IP address.

⚠️ Default password: admin.

Log in to the web interface

Change Password

Immediately after the first login, it is recommended to change the web interface access password. Go to System → Security → Change Access Password.

Change access password

Configure Mining Pool

Go to Mining → Pools and configure at least one Pool to start (for details, see Mining → Pools):

• URL: Pool server address and port, for example: btc.viabtc.com:3333
• Password: Worker password (check your Pool settings).

After configuration, click «Save», then «Apply».

Configure mining pool

Select Overclocking Profile

Go to Mining → Performance (for details, see Mining → Performance).

Choose one of three operating modes:

• No profile: Set global frequency and voltage manually. Suitable for experienced users who want full control over parameters.
• With profile, no auto-switching: Select an Overclocking profile, for example, 1700 watt ~ 103 TH. The miner will operate on a fixed profile, and Auto-tune will select optimal parameters for each chip.
• With profile and auto-switching: The miner will operate on the selected profile, and Auto-tune will select optimal parameters for each chip. The system automatically increases or decreases the profile based on temperature and consumption.

⚠️ It is not recommended to immediately select the maximum Overclocking profile. Start with a medium value for your model, allow Auto-tune to complete its setup, and assess operational stability before increasing the load.

After configuration, click «Save», then «Apply».

Select overclocking profile

Step 5: Check Status

Go to the main Dashboard screen and ensure that:

• Mining is displayed in the status bar (see Dashboard);
• Hashrate is displayed;
• The miner is connected to the Pool — the Pools widget shows an active connection.

Check miner status

Step 6: Check Advanced Settings

Go to Mining → Advanced and familiarize yourself with additional protection parameters (see Mining → Advanced).

Check advanced mining settings