Site Dashboard
To open the dashboard, select a site in the side menu and go to the Dashboard section.
Widgets
Hashrate
Displays the site's average performance for the selected period (AVG) and real-time hashrate (RT).
- AVG — primary metric. Average hashrate for the selected time range. The period label is shown below the value, e.g., "AVG Per day — 24 hours"
- RT — real-time hashrate. Shows the current state of the fleet
- Trend badge — percentage change of AVG compared to the previous equivalent period. Green when increasing, red when decreasing
Power
Current total power consumption of the site with automatic unit scaling (kW / MW / GW). Displays load relative to the site's maximum capacity, as configured in settings.
Income
Estimated net income of the site for the selected period.
- Main value — income minus electricity costs
- Below the main value — a line showing "Electricity: ~N $" with the approximate electricity cost
- Trend badge — percentage change in income compared to the previous period
- Tooltip on the heading explains the calculation formula
For correct income and electricity cost calculations, specify the rate in the site settings (Electricity rate).
Workers
Distribution of site devices by status as a progress bar. Shows the ratio of Mining / Stopped / Error / Offline without going to the device list.
Charts
Below the widgets are three site charts. Select a time range: 1h, 6h, 12h, 1d, 1w, 1m.
| Chart | Description |
|---|---|
| Hashrate | Total hashrate of all online site devices over time |
| Power | Total site power consumption over time |
| Temperature | Maximum site temperature over time |
Full-Screen Mode
Click ↗ on any chart to open it in a full-screen modal window. The following tools are available in full-screen mode:
- PAN — scroll the chart horizontally
- ZOOM — zoom into a selected area
- RESET ZOOM — reset the zoom level
Autoscale
The Autoscale toggle on charts allows the Y-axis to automatically adjust to the current data range. Useful when values change sharply.
Auto-Refresh
Dashboard data updates automatically at a set interval. The current interval is visible as a horizontal progress bar on the site selector button — it fills up as the next refresh approaches.
To change the interval, click the site button and open the submenu:
| Interval | Description |
|---|---|
| Off | Auto-refresh is disabled |
| 30s | Refresh every 30 seconds |
| 1m | Refresh every minute |
| 5m | Refresh every 5 minutes |
| 15m | Refresh every 15 minutes |
Auto-refresh only works in the active browser tab. The setting persists between sessions.
Device Statuses
HashCore Pulse uses a two-level status system for each device. The first level reflects device connectivity, the second — what's happening inside the miner. Together they give a complete picture of the fleet's state without needing to access each device individually.
Widgets (Hashrate, Power, Income, Workers)
Widgets are located at the top of the site dashboard and provide an instant summary of key metrics. All widgets respect the selected time range and algorithm filter.